Cyanoacrylate can be used to create good quality temporary bonds (e.g. “super glue”). The great thing about cyanoacrylate is its ability to quickly achieve electrical contact. It might take from seconds to years regarding the duration of the bond depending on the method. The performance of a short time if the part is very close

Tagged under:

The electrode can be removed by a few methods which include, sandblast, laser ablate, chemically etch and sandpaper.

Tagged under:

When an object such as a rod is stretched to a new length (L + delta L) from its original length (L), the ratio (Δ L)/(L) is said to be the strain in the rod. For the convenience of visualization the dimensionless measure of stretching or compression is called as “microns per meter (microstrain)”, “millimeters

Tagged under:

The stiffness of materials is explained through the young’s modulus which in elastic solids is a material property. During the elongation (Δ L) of a plate or rod of length (L) and cross section (A) due to force (F) the Young’s modulus can written as below: Y = (L/A)*(F/ΔL) In the equivalent spring constant of

The breaking of a solid as a result of tension measured in stress that is Newtons/m2 or psi is called tensile strength.

Tagged under:

The loss of some elastic energy for general tendency of vibrating structures or materials into external fission or heating is known as ‘Damping’.

Tagged under:

In response to change in temperature, it is the change in electrical response polarization state due to the tendency of some materials. As a response to temperature shifts, a voltage will arise between the electrodes on the two surfaces if the materials.

Tagged under:

The presence of electrical charges signifies an electric field. It is the central mechanism responsible for the interaction of charges by filling the space around the charge. Due to the electric field a charge concentration will undergo accelerating force (F) when a test particle with small charge (Q) is place near it. At that place

Tagged under:

The essential unit which is a rhomboid or cubic shaped cage made up of atoms exists in some atomic lattice structures. Inside the cell, the cage is responsible for holding single semi-mobile ion that has numerous quantum position states. By applying electric field or by distorting the cage (applied strain), the ions post state will

cylinder piezoelectric ceramics

Piezoceramics FAQs

Piezoelectricity is a type of electricity that occurs when materials possessing piezoelectric properties are exposed to pressure or stress. Examples of these materials are ceramics, also called piezoceramics , and crystals. Piezoelectric Ceramics (piezoceramics), such as Piezoelectric Ceramic Ring, Piezoelectric Ceramic Disc, Piezoelectric Ceramic Tube, Piezoelectric Ceramic Ball/Hemisphere, Piezoelectric Ceramic Cylinder and Piezoelectric Ceramic Square/Rectangular.